Resetting The Controlpad; Cp-Rc01 Ir Remote; Product Specifications - AMX CP-3017-TR-US Instruction Manual

Resetting the ControlPad

Each ControlPad features a pinhole Reset pushbutton on the rear on the unit for factory reset. To reset the ControlPad,
press and hold in the Reset pushbutton for 10 seconds, then release it. The ControlPad will reset. During factory reset,
the backlight turns off for all buttons, but all buttons should be back online after 1-2 minutes. If you do not hold in the
reset button for the full 10 seconds, the reset does not occur. (There is no soft reboot with the Reset button, but you can
perform a soft reboot from the web pages.)
When you reset a ControlPad, the ControlPad is restored to the factory default, so
you will lose any scripts, IRL files, Device Interrogation settings, or RMS server
information loaded on the system.

CP-RC01 IR Remote

The CP-RC01 IR Remote (FG1302-70) (FIG. 1) provides local control of CP-3008 and CP-3017 series ControlPads.
FIG. 20 CP-RC01 IR Remote

Product Specifications

CP-RC01 IR Remote
Dimensions (HWD):
Weight:
Battery:
Power Consumption:
IR Transmit Frequency:
Range:
Operating Environment: • Storage temperature range: -40° - 158° F (-40° - 70° C)
Novara 3000 Series ControlPads Instruction Manual
8" x 2" x 1" (20 cm x 5.5 cm x 2.8 cm)
Without batteries: 0.208 lbs (94.34g)
2 AAA Batteries
Approximately 50mA at IR transmit
38 KHz
20-30ft (6-9m) Standard
Note: Range can be affected by factors such as angle of incidence and LED graph brightness.
• Operating temperature range: 41° - 104° F (5° - 40° C)
• Relative humidity: 10% to 90%, non-condensing
Wiring and Device Connections
15