Enabling The Http Web Server; Configuring Device Settings - AMX CP-3017-TR-US Instruction Manual

Device Configuration Software
Configure Global Device Settings Window Options (Cont.)
Web
Enable HTTP Web Server Enables the HTTP web server on all devices when checked. This option is unchecked by
Administrator Name
Administrator Password
HTTP Port
Download Logo to Device You can download a logo to device when checked. This field is not available until you load
Select Image
View Image's Actual Size
Image Dimension
Image Size

Enabling the HTTP Web Server

Perform these steps to enable the HTTP web server and allow user access to web pages for all devices:
1.
Access the Device Configuration Layout & Inspector window (FIG. 35).
2.
Click Global Settings. The Configure Global Device Settings window opens (FIG. 37).
3.
Click Web.
4.
Click Enable HTTP Web Server.

Configuring Device Settings

At the device level, you can set individual settings for a single device or use the global device settings set for the project.
Select a device and click the Device Settings button to access the Configure Device Settings window (FIG. 38).
FIG. 38 Configure Device Settings window
The window contains six separate screens with settings for Network, Device Info, DNS, Connections, NTP, and Web.
Click the option you want in the Content area to view or change the settings for each type. The Network, DNS,
Connections, NTP, and Web screens are identical to the screens containing the global settings configuration options, but
they each also include an option to use the global settings for the device.
32
default. This option enables access to web pages for all devices. See the Web
Console section on page 63 for more information on the web pages.
Enter the web server administrator name in this field. The default administrator name is
Admin and is populated in the field by default. This option is for future use. Any change in
the administrator name is not reflected in web access.
Enter the web server administrator password in this field. The default password is 1988
and is populated in the field by default. This option is for future use. Any change in the
administrator password is not reflected in web access.
Enter the web HTTP port in this field. The default HTTP port is 80 and is populated in the
field by default.
a logo image.
Click this button to load an image. Clicking this button opens a browser window you can
use to navigate to the image's location. The image must be no greater than 7K in size.
Click this button to view the image's actual size. Clicking this button opens the View
Image dialog.
Displays the loaded image's dimension in pixels. This information is view-only.
Displays the loaded image's size in bytes. This information is view-only.
Novara 3000 Series ControlPads Instruction Manual