Device Setup; Scripting - AMX CP-3017-TR-US Instruction Manual

Device Configuration Software
FIG. 40 Button area

Device Setup

The following sections describe the options available for event scripting for each keypad.

Scripting

The Scripting area enables you to program a series of events and upload the program to the device. In this area, you can
view the script as it currently exists, and add, delete, or re-arrange the order of events as needed.





FIG. 41 Scripting area
The following table lists the Scripting options:
Scripting Options
Display Level Click to display only the events belonging to a particular bank or toggle level. You can choose from All or
Expand View Click to open the Script window. The Script window displays a larger, more easily readable version of the
Insert
Add
Edit
34
The maximum number of events you can add to a script is 255.
The maximum total number of scripted events across all scripts is 6000.
All script events must be programmed at the same time.
If you program a script and send it to a device, then create a second script and send it to the device, the second
script replaces the first script.
You can also create boot-up scripts which executes when a device boots-up and before any input is accepted
by the ControlPad. See the Creating a Boot-Up Script section on page 51 for more information.
any number from 1-4. This option is not available if you set the Button Behavior Action Type to Normal.
scripting area.
All button options from the Scripting area appear in the window and you can use these options to edit,
copy, cut, paste, and delete events from the script.
While the Script window is open, you cannot access the script in the AMX DCS window. An Expanded
View Active message appears in the Scripting area when the Script window is open.
Click to insert an event above the selected event in a script. This button appears grayed-out until you
select an event within the script.
Click to add an event to the script. Clicking this button adds the current event from the Content area on
the left side of the screen to the script. The maximum number of events you can add to a script is 255.
Click to open the Script Event Editor so you can edit the selected event. In the Script Event Editor, the
options that appear depend on the type of event you are editing. For example, if you are editing a Button
Backlight event, the Button Backlight options appear in the Editor.
Make any changes, then click Save to close the Editor.
Clicking a button on the device
interface changes the event button
number here.
Novara 3000 Series ControlPads Instruction Manual