Functions On The Surface; Compass; Finding A Direction - Uwatec ALADIN SPORT MATRIX User Manual

MOD of gas 1
Belated or manual change of gas
mixture:
You can catch up on a required change to
gas 2/gas d until you reach the surface.
Procedure:
1. Initiate the switching process by
pressing and holding the right button.
The Aladin Sport displays "GAS 2" /
"GAS d", MOD and the oxygen fraction
of gas 2/gas d blinking for 30 seconds.
By pressing the right button you can
select "GAS 2", "GAS d" or "GAS 1".
2. Switch to the regulator with the selected
gas mixture and start breathing.
3. Confirm the change with a press-and-
hold of the right button. "GAS 2","GAS
d" or "GAS 1" and its oxygen fraction
is displayed for 5 seconds without
blinking. The decompression calculation
will readjust accordingly.
Submerging again after a change to
gas 2/gas d:
If, after a change to gas 2/gas d the
Maximum Operating Depth (MOD) of gas 2/
gas d is exceeded, the ppO
will appear. If this happens, switch back
to gas 1 or ascend to the MOD of gas 2/
gas d. Failure to do so can result in oxygen
poisoning.
Procedure:
1. Initiate the switching process with a
press-and-hold of the right button.
The Aladin Sport displays
"GAS 1"/"GAS 2", MOD and the oxygen
fraction of gas 1/gas 2 for 30 seconds.
2. By pressing the right button you can
select "GAS 2", "GAS 1" or "GAS d".
3. Switch to the regulator with the selected
gas and start breathing.
ALADIN SPORT USER MANUAL
4. Confirm the change with a press-and-
hold of the right button. "GAS 1" / "GAS
2" / "GAS d" and its oxygen fraction
is displayed for 5 seconds without
blinking. Afterwards the decompression
calculation will readjust accordingly.
4.
4.1
4.1.1
max warning
2
To use your compass:
• Starting from the time of day display
push the left or right button to get to the
compass screen, then press-and-hold
the right button.
FUNCTIONS ON THE
SURFACE

COMPASS

Finding a direction

37