Factor ONE Disc Assembly Manual page 11

DISC
3-13
Maneuver fork into position taking care not to
damage Di2 cable & brake hose.
3-17
Insert the compression rod from
below. Use compression rod to adjust
the headset preload.
3-14
Route Di2 cable & brake hose through the largest hole
in the compression nut.
3-18
Secure the headset adjustment by tightening the
M5 Ti screw to 4 Nm.
Assembly Manual
3-15
Install compression nut.
3-19
Install the desired amount of headset spacers.
07