Mob Operation - Standard Horizon QUANTUM AIS GX6000 Owner's Manual

8.11.3 Deletion
1. Press the ►/◄ key repeatedly, then press the
[PRESET] soft key to recall the preset channel.
2. Rotate the DIAL/ENT knob to select the preset chan-
nel to be deleted.
3. Press and hold the [PRESET] soft key until the
"[P-SET]" icon and channel number are blinking.
4. Press the [DELETE] soft key to delete the channel
from the preset channel memory.
5. Repeat steps 2 through 4 to delete the desired chan-
nels from preset channels.
6. To exit from deleting the preset channels, press the [QUIT] soft key.
8.12

MOB OPERATION

The GX6000 provides a feature to memorize the position information instantly
in case of MOB (Man Over-Board).
1. Press the ►/◄ key repeatedly, then press the [MOB]
soft key.
2. Press the [TO WPT] soft key to start the navigation to
the displayed position. For details about the naviga-
tion, see section "11 NAVIGATION".
To modify the displayed position information, press the
[POS/TM] soft key. For details about the modification,
see "Editing a Waypoint" on page 86.
3. To transmit a DSC distress message, lift the red spring
loaded DISTRESS cover on the right side of the
transceiver, then press and hold the DISTRESS key
(see section "10.2.1 Transmitting a DSC Distress
Alert" for details).
The nature of the distress call is automatically set to "MOB".
41