Standard Horizon QUANTUM AIS GX6000 Owner's Manual page 80

10.9.3 Selecting Vessels to be Automatically Polled
The radio uses the individual directory to select vessels to be auto-
matically polled. Refer to section "10.4.1 Setting up the Individual /
Position Call Directory" and to enter MMSI of vessels you want to
poll before proceeding.
[ ]  "DSC CALL"  "AUTO POS POLLING"
1.
2. Rotate the DIAL/ENT knob to select "SELECTED ID",
then press the [SELECT] soft key.
3. The radio will show a blank row highlighted when you
select the vessel for the first time. Press the [SELECT]
soft key.
4. The radio will show the vessels programmed in the indi-
vidual directory. Rotate the DIAL/ENT knob to select
the desired vessel, then press the [ENTER] soft key.
5. For more entries, rotate the DIAL/ENT knob to select a
blank row, press the [SELECT] soft key, then perform
step 4.
6. When finished, press the CLEAR key to exit to the
radio mode.
10.9.4 Enabling/Disabling Auto POS Polling
[ ]  "DSC CALL"  "AUTO POS POLLING"
1.
2. Rotate the DIAL/ENT knob to select the "ACTIVA-
TION", then press the [SELECT] soft key.
3. Rotate the DIAL/ENT knob to select "START" to
enable transmissions or "STOP" to disable, then press
the [ENTER] soft key.
78
NOTE