Table of Contents
Advertisement
A
Second clamp after the second elbow
B
First clamp after the second elbow
7.14
Finishing the outdoor unit
installation
7.14.1
To finish the outdoor unit installation
1 Insulate and fix the refrigerant piping and interconnection cable
as follows:
c
a
d
b
e
f
a
Gas pipe
b
Gas pipe insulation
c
Interconnection cable
d
Liquid pipe
e
Liquid pipe insulation
f
Finishing tape
2 Install the service cover.
7.14.2
To close the outdoor unit
1 Close the switch box cover.
2 Close the service cover.
NOTICE
When closing the outdoor unit cover, make sure that the
tightening torque does NOT exceed 4.1 N•m.
EVLQ05+08CAV3 + EHYHBH05AA + EHYHBH/X08AA +
EHYKOMB33AA
Daikin Altherma hybrid heat pump
4P355634-1C – 2018.06
A
B
7.15
Finishing the indoor unit
installation
7.15.1
To close the indoor unit
1 Close the switch box.
2 Mount the side plate to the unit.
3 Mount the top plate.
NOTICE
When closing the indoor unit cover, make sure that the
tightening torque does NOT exceed 4.1 N•m.
Before doing the configuration of the heat pump module, make sure
that the hybrid module and gas boiler are installed correctly.
7.16
Finishing the gas boiler
installation
7.16.1
To purge the gas supply
1 Turn once the screw counterclockwise.
7 Installation
Installer reference guide
53
Advertisement
Table of Contents
