Startup And Login - Conair TrueFeed User Manual

7.2 Start-up & Login
Immediately after switching on the main power of the Dual TrueFeed, the software versions will be displayed.
In the first screen the software version of the terminal will be shown.
Conair Terminal
Version x.xx
Date: January 2007
After a few seconds the second screen appears for 10 seconds.
Conair TrueFeed
Color in Control
Vx.x
SP-Vx.x
MENU to continue
BL Vx.x
Mac-00:12:EC:xx:xx:xx
The Dual TrueFeed controller has three user levels:
1. Operator 2. Tooling (Supervisor – level 1)
The functions for each user level are shown in the table below.
The Operator Level is the lowest level; only the settings for production can be altered. The reminder of the
settings/menus are not displayed or are locked.
To access a different user level, enter the LOGIN menu and enter the password (4 numerals) and press
"Enter". The passwords for the Tooling and Supervisor user levels can be defined by the supervisor in the
CONFIGURATION menu.
MENU TITLE:
[LOGIN] To enter the different user levels.
[CONFIGURATION] To configure the feeding system.
[PRODUCTION] To do the production settings.
*In OPERATOR Level jobs and materials are read only.
[FILES] To look for, rename or delete jobs and curves
[HOPPER LOADER] To do the hopper loader settings,
only visible when a hopper loader is selected.
[CALIBRATION] To make material calibrations, only visible when control
mode is set to GRAVI (Gravimetric).
[LOADCELL] To calibrate the loadcell.
[WEIGHT CHECK] To check the hopper or object weight.
[CONSUMPTION] View of the total quantity of material fed by the
Dual TrueFeed.
[ALARMS] View of the alarm history
*In TOOLING level the alarm configuration is invisible.
[EVENT LOG] The history of events or settings will be logged in this
menu.
If you have forgotten your supervisor password, contact Conair Service at 1-800-458-1960.
When entering a wrong password the user level will be set automatically to Operator Level.
Vx.x = user software version Vx.x
SP-Vx.x = Language version Vx.x
(Default language is English)
SP means that the alternative language is Spanish.
BL Vx.x = bootloader software (firmware) Vx.x
Mac address = ID address of the network card
FUNCTION:
13
3. Supervisor (Service – level 2)
USER LEVEL
Can be changed in LOGIN menu.
SUPERVISOR TOOLING
Default code Default code
2222 1111
YES YES
YES NO
YES YES
YES NO
YES YES
YES YES
YES NO
YES YES
YES YES
YES YES*
YES NO
Dual Feed TrueFeed Manual
OPERATOR
Default code
0000
YES
NO
YES*
NO
YES
NO
NO
NO
NO
NO
NO