Table of Contents
Advertisement
Problem
Enter PUK
Loss of Network
You have entered a
number but it was
not dialed
Your correspondent
cannot reach you
Your correspondent
cannot hear you
speaking
The voice quality of
the call is poor
No number is dialed
when you recall a
contact
Possible Solution
The PIN code has been entered incorrectly three times in
succession, and the phone is now blocked. Enter the PUK
supplied by your service provider.
You may be in a weak signal area. Move and try again.
You are trying to access an option for which you have no
subscription with your service provider. Contact the service
provider for further details.
Be sure that you have pressed Call key.
Be sure that you have accessed the right network service.
Be sure that you have not set an outgoing call barring option.
Be sure that you have entered the area code.
Be sure that your phone is switched on. Be sure that you are
accessing the network service. Be sure that you have not set
an incoming call barring option.
Be sure that you have switched off the loudspeaker. Be sure
that you are holding the phone close enough to your mouth.
The microphone is located at the bottom of the phone.
Check the signal strength indicator on the display. The
number of bars indicates the signal strength. Try moving the
phone slightly or moving closer to a window if you are in a
building.
Use the Phonebook Search feature to ensure the number
has been stored correctly. Resave the number, if necessary.
37
Advertisement
Table of Contents
