Date And Time - DPS Telecom Site Dialer G3 User Manual

31
8.7

Date and Time

The Provisioning > Date and Time screen allows you to set time and date on the unit, configure
automatic time adjustment, and adjust the clock for Daylight Savings Time.
Date
Time
Enable NTP
NTP Server Address
or Host Name
Time Zone
Enable DST
Start Day
End Day
The Date and Time screen
Date and Time Settings
The current date.
The current time.
Check to enable automatic time adjustment with Network Time Protocol.
The NTP address or host name from where you want the unit to retrieve the time from.
The time zone the unit is located in.
Check to enable Daylight Savings Time acknowledgement on the unit.
The date and time of the beginning of Daylight Savings Time.
The date and time of the end of Daylight Savings Time.