DPS Telecom Site Dialer G3 User Manual page 28

23
Suspend this Profile
Username
Password
Confirm Password
Check all
Edit logon profiles
Edit unit configuration
View monitor pages
Send relay commands
TTY access (access via
Craft port or via Telnet)
Initialize config to
factory defaults
Upload new firmware
Get audit log
Purge (delete) audit log
Get (backup) config
Get and delete analog
history
Get and delete
description recordings
The Provisioning > User Profiles > Edit User Profile screen
User Profiles Summary
When checked, the selected profile cannot be used to access the web interface.
The name this profile uses to log into the web interface.
The password this profile uses to log into the web interface.
Must be same as Password
Access Rights
Check to check all Access Rights. Uncheck to uncheck all Access Rights.
Check to allow profile to alter any other profile.
Check to allow profile to edit settings under to Provisioning menu.
Check to allow profile to view pages under the Monitoring menu.
Check to allow profile to set status of control relays to OPR, RLS, or MOM.
Check to allow profile to access the Site Dialer's TTY interface, which is accessed
via the Craft port, or Telnet.
Check to allow profile to reset the Site Dialer to its original factory settings.
Check to allow profile to update Site Dialer with new firmware.
Check to allow profile to view and download the audit log.
Check to allow profile to delete the audit log.
Check to allow profile to download the configuration file as a backup.
Check to allow profile to view and delete the history of analogs tracked by the unit.
Check to allow profile to view and delete description recordings.