Step 4: Setup Pager Carriers; Step 5: How To Setup Pager Schedules - DPS Telecom Site Dialer G3 User Manual

11
3. Enter in the IP address and port (default is 2001) of the Site Dialer G3.
4. Description and Site Name are optional.
5. For Device Type, select Site Dialer. (This is the only option).
6. You can leave the other fields as default or customize as you see fit.
7. Save the device.
6.4

Step 4: Setup Pager Carriers

1. Go back to the main menu and choose Notifications > Targets/Groups. This is where you add
your technicians, who get called when an alarm comes in.
2. Add a pager carrier by pressing Add.
3. Enter in the Int (Initials) and Name for your technicians.
4. For Type, select Voice.
5. For Pager/Phone, enter the phone number to call.
6. The Pin field should be filled in for added security. This is the ID you'll press on your phone to
acknowledge an alarm. Example: If your ID is 123, you'll press 123# to ack an alarm from your
phone. If you did not enter in an ID, you'll simply press # to ack.
7. Finish entering in all your operators and then Save.
6.5

Step 5: How to Setup Pager Schedules

1. Go to Notifications > Weekly Schedules from the main menu.
2. Enter an operator number and a description of the schedule, then hit Create.
3. In the grid on the Weekly Schedule tab, configure when you want each pager carrier to receive