Cleaning The Filters - Shark ROTATOR NV95 Series Instructions Manual

STEP 3
3 Press top dust-cup release
latch to access and clean
dust screen as required.

CLEANING THE FILTERS

1 Pre-Motor
(foam and felt):
With the dust cup
removed, take out and
rinse the foam and felt
filters with water. Tap
loose dirt off filters
between washes
as needed.
FOAM FILTER
FELT FILTER
HEPA
2 Post-Motor (HEPA):
To access the HEPA filter,
reach under the grill and
press the button and pull
the grill away from the
vacuum. Remove and
rinse the HEPA filter.
s h a r kc l e a n . c o m 16