PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. This Owner’s Guide is designed to help you get a complete understanding of your new Shark Rotator upright vacuum cleaner. If you should have a question, please call the customer service line at 1-800-798-7398.
IMPORTANT SAFETY INSTRUCTIONS FOR HOUSEHOLD USE ONLY WARNING To reduce the risk of injury, fire, electric shock, and property damage resulting from improper use of the appliance, carefully observe the following instructions. This unit contains electrical connections and moving parts that potentially present risk to the user.
Page 5
34 DO NOT pick up toxic solutions (e.g., blockages. chlorine bleach, ammonia, or drain cleaner). 24 Only use Shark-brand filters and 35 DO NOT use in an enclosed space accessories (failure to do so will void where vapors are present from paint, the warranty).
ASSEMBLING YOUR VACUUM TIP: For quick cord STEP 1 STEP 2 access, rotate upper hook down and remove cord. TIP: To store your vacuum, wrap cord around cord hooks. CLICK 2 Slide handle into top and Place the vacuum body onto floor nozzle.
Page 7
STEP 5 STEP 3 STEP 4 3 Insert extension wand 4 Insert the crevice tool and 5 Wrap hose around lower through tool caddy and dusting brush into the hose clip, rest in hose lower coupling. accessory clips as shown. cradle at top of unit and attach to wand.
USING YOUR VACUUM IN UPRIGHT MODE WARNING: DO STEP 1 NOT use to pick up drywall dust, fireplace ash, or embers. DO NOT use as an attachment to power tools for dust collection. NOTE: The brushroll will only spin once the vacuum is reclined back.
Page 9
STEP 3 STEP 2 POWER POWER + BRUSHROLL 2 Press the On/Off switch to the “I” position 3 Press the ON/Off switch to the “II” position to vacuum bare floors or cleaning with the to engage the motorized floor brush (for hose (straight suction only).
USING YOUR VACUUM IN ABOVE-FLOOR MODE THE BENEFITS OF SUCTION CONTROL Suction Control is a way for you to adjust suction power when you are using different tools or vacuuming different surfaces. For example, if you are feeling resistance vacuuming thick carpet or upholstery, opening the suction control to MIN will help reduce your push/pull effort.
Page 11
2 Attach desired cleaning accessory. Should you need to increase or decrease the amount of suction, refer to Helpful Tips (page 11), Suction Release. s h a r kc l e a n . c o m...
HELPFUL TIPS SUCTION CONTROL POWER BUTTONS 2 The “I” button turns on This unit is equipped with a suction control suction only. This is ideal to help with push and for use on bare floors, pull on high pile carpets, delicate area rugs and for area rugs and to release use with accessories.
Page 13
CORD HOOK HEIGHT ADJUSTMENT FILTERS 4 For quick cord access, 5 This floor nozzle has been 6 Remember to clean your rotate upper hook 180° optimized to work on all filters regularly under and remove cord. Rotate it types of carpets as well normal use.
COMPATIBLE ACCESSORIES There are a variety of 5.5” Crevice Tool 16” Crevice Tool accessories that are compatible Gives you extended Gives you extended with this vacuum series. cleaning reach for small cleaning reach for small spaces. spaces. The top flap of your box shows the select accessories that are included with your model.
MAINTENANCE To keep your vacuum’s suction power optimal, follow STEP 1 STEP 2 these instructions. Make sure unit is off and cord is unplugged. WARNING: To reduce the risk of shock and unintended operation, turn power off and unplug unit before servicing.
STEP 3 FOAM FILTER FELT FILTER HEPA CLEANING THE FILTERS Pre-Motor 3 Press top dust-cup release Post-Motor (HEPA): (foam and felt): latch to access and clean To access the HEPA filter, With the dust cup dust screen as required. reach under the grill and removed, take out and press the button and pull rinse the foam and felt...
CHECKING FOR BLOCKAGES WARNING: To reduce the risk of shock and STEP 1 STEP 2 unintended operation, turn power off and unplug unit before servicing. TIP: You can also check for blockages in the hose and tubes. Just remove floor nozzle, dust cup and hose and shine a flashlight in the openings.
HOSE AND TUBES This unit is equipped with a clear cover at the top of the intake duct. Remove floor nozzle and hose and shine a flashlight up from the bottom to check for possible blockage. Remove dustcup and check all intake openings. s h a r kc l e a n .
TROUBLESHOOTING GUIDE WARNING: To reduce the risk of shock and unintended operation, turn power off and unplug unit before servicing. Vacuum is not picking up debris. No suction or light suction. (Refer to Maintenance section for more information.) • Check filters to see if they need cleaning. Follow instructions for rinsing and drying the filters before re-inserting in the vacuum.
FIVE (5) YEAR LIMITED WARRANTY The 5-Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable. SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of 5 years from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in this instruction manual, subject to the following conditions and exclusions.
Need help?
Do you have a question about the ROTATOR NV95 Series and is the answer not in the manual?
Questions and answers
How to replace a power switch on a nv95 vacuum cleaner