Mira PLATINUM Installation Manual page 23

Drill and plug Slide Bar Assembly
¿[LQJ KROHV
,QVHUW ¿[LQJ VFUHZV WKURXJK KROHV
LQ :DOO %UDFNHWV DQG ¿[ WR ZDOO 'R
not fully tighten. Use template to
set correct distances between Wall
Brackets. Fully tighten screws. Use
ORQJHU ¿[LQJ VFUHZV LI XVLQJ VSDFHUV
supplied.
Note! Slots in Wall Brackets allow
for adjustment. Use one horizontal
slot and one vertical slot.
Make sure that holes for Slide Bar
Securing Screws are positioned
correctly, as shown.
Fit ceiling plate and extension tube.
Note! Extension tube may need to
be shortened, use a hacksaw to
shorten tube. Make sure rough end
is concealed in ceiling.
23