Table of Contents
Advertisement
the slot that is close to a CPU side with a lot of empty slots.
(3) After bracket of board fix to computer by using a screw, close the case.
(4) Turn on the switch after assembly.
* Above picture shows no PC case for user understanding. Generally it use in case of PC
mother board
.
(5) When the power on, two LED is lighting on like Figure 2-2. If the board finishes the configuration
Normally, A LED4 lights on. A LED6 lights on/off per 1 second in order to ideal of clock.
(6) From LED1 to LED5 light on in order to PCI bus operation.
[Figure 2-2. PCI-EK01 connect to PC]
6-
-
PCI-EK01 Users Manual (Rev 1.0)
http://www.daqsystem.com
Advertisement
Table of Contents
