Table of Contents
Advertisement
Securing the Device
16
Use zip ties to fasten the hardware securely to a
stable bracket or wire bundle under the dash.
IMPORTANT: The device must be installed high
in the dashboard area and secured with the top of
the unit facing the sky (the side of the unit with the
Networkfleet logo). Also verify that the device is
not covered by metal and check that the green LED
is blinking in a slow pattern, which verifies that the
unit is getting GPS data (as explained on page 13).
To avoid damage from condensation,
ensure that the unit is not at the lowest
point of the installation and secure it
away from moving parts.
Advertisement
Table of Contents
