1. S tart the vehicle's engine. All lights (Red, Yellow, and Green) on the device should turn on
solid for 15 seconds and then begin blinking rapidly (twice a second).
2. The device is operating normally when the rapid blinking ceases and the Green and
Yellow lights begin to blink in a slow pattern (ON for 5 seconds and OFF for 1 second).
The Red light pattern will continue to vary and should not be used to verify installation.
3. The vehicle must be idled or driven for at least 15 minutes to reach normal operating mode
and ensure activation is complete.
Verifying Successful Installation
Side of Unit
LED Light Indicators
13