Heavy Duty Harness Installation - Networkfleet 5500 Installation Manual

10
Connecting to the Diagnostic Link Connector (DLC) Port
1. W ith the vehicle's engine OFF, unscrew the DLC port from its position under
the dashboard*. In most cases, the DLC port is located under the dashboard
on the left side of the steering wheel, facing toward the floorboard.
2. Plug the Bypass Connector of the harness into the DLC port that was
previously removed from the vehicle in step 1. For the 9-pin connector,
turn the rotating cap clockwise to lock into place.
3. Mount the Core Connector of the harness into the place
in which the DLC port originally resided.
*Note: DLC Port Connector may also be located near or
behind the driver seat.

Heavy Duty Harness Installation

Networkfleet Unit
to vehicle
Dashboard
Original DLC Port
Bypass Connector
Core Connector