Removing the front I/O-panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
right-side
2
Remove the
front
Procedure
1
Lay the computer on the left side and disconnect the front-audio cable from the
system board.
2
Disconnect the USB 2.0 cable from the system board.
3
Disconnect the USB 3.1 (Type-C) cable from the system board.
38
computer. After working inside your computer, follow
After working inside your
cover.
cover.
computer. For more safety best
www.dell.com/
Before