Replacing the top cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the tabs on the top cover with the slots on the chassis.
2
Slide the top cover towards the front of the chassis and secure the top cover in
place.
3
Replace the screw (M3x5) that secures the top cover to the chassis.
4
Place the computer in an upright position.
Post-requisites
Replace the
right-side
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before
95