Replacing The Heat Sink; Procedure; Post-Requisites - Dell D27M Service Manual

Replacing the heat sink

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION: Incorrect alignment of the heat sink can damage the system
board and processor.
NOTE: If either the system board or the heat sink is replaced, use the
thermal pad provided in the kit to ensure that thermal conductivity is
achieved.

Procedure

Place the heat sink on a clean and flat surface.

Post-requisites

1 Replace the processor
2 Replace the right-side
computer. After working inside your computer, follow
After working inside your
fan.
cover.
computer. For more safety best
www.dell.com/
Before
81