Replacing the light bar
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align and slide the light bar into the slot on the chassis.
2
Replace the screw (M3x5) that secures the light bar to the chassis.
3
Connect the light bar cable to its connector on the chassis.
Post-requisites
Replace the
right-side
34
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before