Motor Test; Lamp Test - NAMCO Ace Driver Victory Lap Operator's Manual

7-3-5

Motor Test

Note: Performing the steering motor test can be dangerous, sit on the
seat properly, and take hands off the steering wheel.
The following screen is displayed when "MOTOR" is selected on the I/O screen.
I/O TEST
DIP 2 12345678
3 12345678
LINK ON 2
SWITCH
MOTOR
BASE MOTOR
STEERING
EXIT
GAS: TURN
(a) Unused
(b) Tests the steering feedback motor.
When "STEERING" is selected and the accelerator is pressed the test is "ON"
and the motor will start and turn the steering wheel left and right.
Pressing the accelerator again turns the test "OFF" and the motor will stop.
Select "EXIT" to return to the I/O test screen.
7-3-6

Lamp Test

The following screen is displayed when "LAMP" is selected on the I/O screen.
I/O TEST
DIP
LINK ON 2
LAMP
GAS: LIGHT
Select "EXIT" to return to the I/O test screen.
COUNT O
OFF
OFF TORQUE
SHIFT: CHOOSE
2 12345678
3 12345678
COUNT 0
TOP LAMP
SIGNAL LAMP RED
SIGNAL LAMP GREEN
EXIT
SHIFT: CHOOSE
Page 21
............... (a) Seat motor test
00 ............... (b) Steering motor test
........................ (a) Tests top lamp.
........................ (b) Unused
........................ (c) Unused