Input/Output Test Of-Switches (Vo Test) - NAMCO Panic Park DX Operation Manual

7a7m4 Input/Output test' of switches (110 TEST)
I/0 test is conducted on each switch.
II
Select "I/0 TEST' in the "MENU" screen. Press the enter switch.
"I/0 TEST' screen is displayed.
I/0 TEST
DIP 12345678 [ON/RED]
I
I
0 PCB CHECX
I/J! INITIALIZE
SWJ:TCH TEST
LAMP TEST
EXIT
SELECT SW :CHOOSE
ENTER SW : ENTER
[VO TEST screen]
........................... (a)
........................... (b)
........................... (c)
........................... (d)
........................... (e)
II
Select any item that you want to execute by the select switch.
The item being selected blinks.
II
To move to TEST screen of the blinking item, press the enter switch.
II
To return to the MENU screen, select EXIT and press the enter switch.
(a) State of the DIP switch
• The state of the DIP switch on the game PC board is displayed.
The switch for the number displayed in red is ON.
(Factory setting : OFF )
• It shall be OFF normally.
(b) I/0 PC Board CHECK
I/0 PC Board is checked.
• To return to I/0 TEST screen, press the enter switch.
I/0 TEST
DIP 12345678 [ON/RED]
I/0 PCB CHECK
Master TX 3536 NAMCO LTD.
PANIC PARK ; Ver 1.00 ; JPN
I/0 PCB CONNECT OK
Nh~CO
LTD.
ASCA-4.
EXIT
ENTER SW:ENTER
[1/0 PC BOARD CHECK screen]
45
7. OPERATION