Pptp Server - Billion M500 User Manual

PPTP Server

The Point-to-Point Tunneling Protocol (PPTP) is a Layer2 tunneling protocol for implementing
virtual private networks through IP network.
In the Microsoft implementation, the tunneled PPP traffic can be authenticated with PAP, CHAP, and
Microsoft CHAP V1/V2 . The PPP payload is encrypted using Microsoft Point-to-Point Encryption
(MPPE) when using MSCHAPv1/v2.
Note: 8 sessions for Server and 8 sessions for Client respectively.
PPTP Server: Select Actived to activate PPTP Server. Deactived to deactivate PPTP Server.
Authentication Type: The authentication type, Chap/Pap, Pap, Chap or MS-CHAPv2 Encryption.
When using PAP, the password is sent unencrypted, whilst CHAP encrypts the password before
sending, and also allows for challenges at different periods to ensure that an intruder has not replaced
the client. When passed the authentication with MS-CHAPv2, the MPPE encryption is supported.
Encryption Ley Length:
Encryption Mode:
CPC:
MS-DNS: Directly set the IP of DNS server or let the 192.168.1.254(the router by default) be the
MS-DNS server.
Rule Index: The Index to mark the session.
Connection Name: User-defined name for the PPTP connection.
Active: Select Yes to activate the account. PPTP server is waiting for the client to connect to this
account.
Username: Please input the username for this account.
Password: Please input the password for this account.
112