Mail Alert - Billion M500 User Manual

Mail Alert

Mail alert is designed to keep system administrator or other relevant personnel alerted of any
unexpected events that might have occurred to the network computers or server for monitoring
efficiency. With this alert system, appropriate solutions may be tackled to fix problems that may have
arisen so that the server can be properly maintained.
SMTP Server: Enter the SMTP server that you would like to use for sending emails.
Username: Enter the username of your email account to be used by the SMTP server.
Password: Enter the password of your email account.
Sender's Email: Enter your email address.
SSL/TLS: Check to whether to enable SSL encryption feature.
Port: the port, default is 25.
Account Test: Press this button to test the connectivity and feasibility to your sender's e-mail.
WAN IP Change Alert (Recipient's Email): Enter the email address that will receive the alert
message once a WAN IP change has been detected.
3G/LTE Usage Allowance (Recipient's Email): Enter the email address that will receive the alert
message once the 3G/4G LTE over Usage Allowance occurs.
Hotspot Session Log (Recipient's Email): Enter the email address that will receive the periodic mail
of the session log information to track the hotspot session information.
100