Advertisement
Short Press for "HOME"
Press [-/▲] or [+/▼] to select a page and [ENT] to open
the selected page.
Note:
It is not possible to turn on the TZT9/14/BB with the MCU002 although the power can be turned off as shown above.
3-3. Showing a Cross Cursor – New with Model TZT9/14/BB v3.12
The TZT9/14/BB v3.12 program has new setting options of
show a cross cursor on the screen and adjust its speed. With the MCU002, the cross cursor will help to see a present
cursor location.
Menu Settings
[Menu] – [General] – [Cross Cursor] – [ON]
[Menu] – [General] – [Cross Cursor Speed] – [1] to [20]
Long Press for "BRILL"
Press [-/ ▲ ] or [+/ ▼ ] to adjust the brillaince and
[CANCEL] to close the window. To turn off the unit, place
a cursor with the joystick on [Power Off This Device] or
[Power Off Network] and press it.
Cross Cursor
and
Cross Cursor
Cross Cursor on Screen
While the joystick in operation, the gray, thick cross cursor
appears on the screen.
The cursor speed can be adjusted between [1] and [20]:
[1] – slowest, [8] – default, and [20] – fastest.
Speed, which enables to
8
Advertisement
