Advertisement
When the NAVpilot-700 mode is changed between AUTO/NAV and STBY with the MCU002 or touch operations, the
TZT9/14/BB will generate a beep sound with the following notification on the top of the screen.
STBY to
The notification of [NAVpilot is engaged.] will appear.
This key sets the own vessel to the center on the screen of Plotter and Radar and cancels echo history of Fish Finder.
This key switches the joystick functions between cursor and scroll modes. At default the
joystick works to move a cursor. Pressing the [CURS/SCRL] key, the joystick works to scroll the Chart,
Radar, and Fish Finder screen.
Plotter screen – Cursor in motion
AUTO/NAV
(2) CENTER
(3) CURS / SCRL (CURSOR / SCROLL)
AUTO/NAV to
The notification of [NAVpilot is disengaged.] will appear.
Plotter screen – Scrolled with joystick
STBY
5
Advertisement
