Advertisement
The joystick can move in eight (8) directions to move a cursor or scroll the screen as shown
above. It also has a "push" function. As an example, if you push the joystick on the Plotter screen,
contextual menus will appear as follows.
Note:
NO "drag"
The joystick has
of operations with the MCU002, see Section 3-5.
These three (3) components work as the RotoKey™: [-/▲ (UP)] key as rotating the RotoKey™
clockwise, [+/▼ (DOWN)] key as rotating the RotoKey™ counterclockwise, and [ENT] as pushing the
RotoKey™. The following screenshots from the Plotter page show how to operate these keys.
Press [ENT] to show RotoKey™ menus.
(4) Joystick
function. For details on limitations
(5) － / UP (▲)
(6) ＋ / DOWN (▼)
(7) ENT
(Sample: Plotter screen from TZTBB)
Press [-/▲] or [+/▼] to move the RotoKey™ menus and
press [ENT]. In this example, [Overlay] is selected.
6
Advertisement
