Advertisement
3-7. Limitations and Notes
(1) Limitation in Drag by Joystick
The joystick has
NO "drag"
of Radar, which requires to be adjusted by drag, will not be
available with the MCU002 joystick. This operation should be
made by touch operations or with a generic mouse/trackball
unit.
(2) Limitation in 3D Mode – Pan/Tilt
You can turn the screen mode into the 3D mode by selecting
[3D Mode] from the contextual menu. However,
pan/tilt the chart with the MCU002
screen with two fingers is the only way to pan/tilt it. The chart
in 3D is always in the default angle as shown at right. Or if you
have paned/tilted the chart with two fingers before, the
screen will be in the previously-set angle.
(3) Note on Cross Cursor Position
The cross cursor position will not appear on the data box. To
show the cursor position, ensure to push the joystick and show
pop-up windows like you tap the screen.
(4) Note on Menu – Second Layer
The first layer of the Menu can also be scrolled with the [-/▲] and [+/▼] keys,
but the second layer cannot. We recommend that the arrow icons on the top and
bottom of the layer be pressed with the joystick to scroll the second layer.
function. The guard zone setting
you cannot
because sliding the
"UP" arrow
"DOWN" arrow
2nd Layer
1st Layer
12
Advertisement
