Advertisement
5. Model MCU002 with TZT9/14/BB v3.02 or Earlier
If the MCU002 is used with the TZT9/14/BB v3.02 or earlier program, there will be limitations
as described below.
(1)
No gray, thick cross cursor is available
(2)
Only the joystick will work.
earlier programs do not detect these key codes from the MCU002. The [-/▲] and [+/▼] keys
may react but will just scroll the screen upwards and downwards respectively.
6. Tips – Model TZT9/14/BB with Generic HID Mouse
While the TZT9/14/BB is preloaded with an HID driver,
a wheel can also be
used. If the Cross Cursor mode is activated on the TZT9/14/BB v3.12 [Menu] – [General] –
[Cross Cursor], it will be more useful to follow the
cursor motion.
Each mouse/trackball component will work as follows.
Components
1
3
1. Wheel
2. Left-click
4
2
3. Right-click
(Sample shot: LTSX50
from NSI, Belgium)
4. Trackball
because there is no menu option of Cross Cursor.
Other hardware keys will not work because the v3.02 or
a generic HID mouse (USB mouse) or trackball unit with
Acts as the
RotoKey ™ of
(1) Rotate to zoom in/out.
(2) Push to show RotoKey ™ items in gold at the right side
of the screen as shown at right.
(3) Select RotoKey ™ items or contexts
Single
tap,
drag/scroll
Acts as
Function
Gesture:
Right-click to activate the preset function in [Menu] – [General] – [Function
Gesture].
Selects a spot
to be tapped,
--- END ---
Functions
TZT9/14:
with trackball
drag/scroll
with left-click
16
Advertisement
