Advertisement
3. Operations – User Interface
3-1. Getting Started – Model TZT9/14/BB New Version v3.12
To fully make use of the MCU002, update the TZT9/14/BB to v3.12, which will be released in May 2014.
3-2. Keys and Functions – Basic Operations
The MCU002 consists of 10 hardware keys to control the TZT9/14/BB as described below.
MCU002
This key activates the NAVpilot-700 AUTO and STBY modes. When opening the NAVpilot-700
control window on the TZT9/14/BB, you can activate the AUTO mode from the MCU002 [STBY/AUTO]
key.
No
Keys
(1)
STBY / AUTO
Sets the NAVpilot-700 to STBY or AUTO modes
(2)
CENTER
Sets the ship in the center of the screen
(3)
CURS / SCRL
Switches the joystick functions between Cursor and Scroll
(4)
Joystick
Moves a cursor in 8 directions
(5)
－ / ▲ (UP)
Acts as rotating RotoKey™ clockwise
＋ / ▼ (DOWN)
(6)
Acts as rotating RotoKey™ counterclockwise
(7)
ENT
Acts as pushing RotoKey™
Short presss to cancel
(8)
CANCEL & MOB
Long press to enter an MOB point
(9)
FUNC
Acts as Function Gesture
Short press to access the Home page
(10)
HOME & BRILL
Long press to open the Brilliance control box
(1) STBY / AUTO
Descriptions
4
Advertisement
