Connecting The Cords - Brother MD-602 Service Manual

5.6 Connecting the cords

Turn off the power switch and wait for the power indicator on the panel display to turn off before connecting
and disconnecting any of the connectors.
Turn off the power switch before inserting or removing the AC power cord plug.
Be sure to connect the power supply to a secure ground. If the ground is not securely connected, electric shocks
may result.
5.6.1 Connecting the power cord, power switch and ground cord
Ground symbol
Mounting bracket
grounding screw
Sewing machine oil pan
5.6.2 Connecting the sewing machine and control box
q
• Loosen the two screws q, and then gently pull the
cover w toward you to open it.
• Connect the 12-pin plug and the 6-pin plug.
• Close the cover w (be careful not to clamp the cord)
and tighten the two screws q.
• Connect the synchronizer cord e.
CAUTION
Ground cord
Hazardous voltage Hochspannung Un voltage non adapté Un voltaje inadecuado
will cause injury. verletzungsgefahr! provoque des blessures. puede provocar las
heridas.
Turn off main Bitte schalten sie den Eteindrel'interrupteur et
switch and wait 5 hauptschalter aus und attendre 5 minutes Apagar el interruptor
minutes before warten sie 5 minuten, avantd' ouvrir le capot principal y esperar 5
opening this cover. bevor sie diese minutos antes de abrir
abdeckung öffnen. esta cubierta.
w
e
Hazardous voltage Hochspannung Un voltage non adapté
will cause injury. verletzungsgefahr! provoque des blessures.
Turn off main Bitte schalten sie den Eteindrel'interrupteur et
switch and wait 5 hauptschalter aus und attendre 5 minutes
minutes before warten sie 5 minuten, avantd' ouvrir le capot
opening this cover. bevor sie diese
abdeckung öffnen.
e
Synchronizer cord
MD-602, 612
Green/yellow
Un voltaje inadecuado
puede provocar las
heridas.
Apagar el interruptor
principal y esperar 5
minutos antes de abrir
esta cubierta.
12-pin plug 6-pin plug
Power switch
Power cord
Ground
7