Programming Unit - Viessmann VITODENS Operating Instructions Manual

Operation
Opening the control unit

Programming unit

You can change any settings on your
heating system centrally at the program-
ming unit of the control unit.
If remote control units are installed in
your rooms, you can also adjust the set-
tings at the remote control units.
Remote control operating instruc-
tions
14 °C
This takes you to the previous step
in the menu or cancels a setting that
has been started.
Cursor keys
Scroll through the menu or adjust
values.
12
21°C
14°C
21 °C
Note
The programming unit can be placed in
a wall mounting base. The wall mounting
base is available as an accessory. Ask
your heating contractor for more infor-
mation.
OK Confirms your selection or saves
the setting.
Calls up "Help" (see following
chapter) or additional information
on the selected menu.
Calls up the extended menu.