Canon WUX450 User Commands page 48

NR
Noise reduction
Format
Setting Command
Response
Reference Command
Response
< Noise reduction setting parameter:ID >
Parameter
OFF
WEAK
MIDDLE
STRONG
Environment
Power mode restriction
LAN
SL0 SL1 SL3 ON
No No No Yes
Remarks
(1) This sets the currently selected input signal and image mode.
WUX450 / WX520 / WUX400ST / WX450ST User Commands
NR=<Noise reduction setting parameter:ID>
i:OK
GET=NR
g:NR=<Noise reduction setting parameter:ID>
Note: See "Error list" for any response other than the above.
Meaning
Turns off
Weak
Middle
Strong
RS-232C
ST ON D-RGB A-RGB COMP
No Yes Yes Yes
- 45 -
Input
HDMI LAN USB
Yes Yes Yes Yes
None
Yes