Dzoom_Rat - Canon WUX450 User Commands

DZOOM_RAT

DZOOM ratio setting
Format
Setting Command
Response
Reference Command
Response
< DZOOM ratio parameter:ID >
Parameter
1
1.5
2
3
4
5
6
8
10
12
Environment
Power mode restriction
LAN
SL0 SL1 SL3 ON
No No No Yes
Remarks
(1) The SET command can be used when DZOOM is disabled and set to other than "1", to enable
DZOOM and display the ratio on the screen.
(2) The SET command can be used when DZOOM is enabled and set to "1", to disable DZOOM
and hide the ratio from the screen.
WUX450 / WX520 / WUX400ST / WX450ST User Commands
DZOOM_RAT=<DZOOM ratio parameter:ID>
i:OK
GET=DZOOM_RAT
g: DZOOM_RAT=<DZOOM ratio parameter:ID>
Note: See "Error list" for any response other than the above.
Meaning
same size (DZOOM disabled)
1.5x
2x
3x
4x
5x
6x
8x
10x
12x
RS-232C
ST ON D-RGB A-RGB COMP
No Yes Yes Yes
- 30 -
Input
HDMI LAN USB
Yes Yes Yes Yes
None
Yes