Pfaff Series 580 Supplement To The Instruction Manual page 8

Controls
Program speed (only in programmed sewing)
● If this key is pressed, the relevant function is switched on or off.
● If the function is switched off, the speed is regulated with the pedal until program speed
Reverse sewing direction (only in programmed sewing)
● If this key is pressed, the relevant function is switched on or off. If the function is activa-
Manual sewing sector (only in programmed sewing)
● If this key is pressed, the relevant function is switched on or off.
Programmed sewing stop (only in programmed sewing)
● If this key is pressed, the relevant function is switched on or off.
Sewing with light barrier
● In the manual sewing mode with light barrier, the number of stitches entered with pa-
Stitch counting (only in programmed sewing)
● If this key is pressed, the relevant function is switched on or off.
● If the function is activated, in the programmed sewing mode the machine switches to
TE/Speed
● In the programmed sewing mode, the number of stitches is entered by stitching them
● If this key is pressed once, the machine changes to parameter input.
● If this key is pressed twice (within 5 seconds) the machine changes to stitch input.
Scroll
● Press this key to scroll through the sub-menus of the program.
PM / Operating mode
● If this key is pressed, the machine switches between manual and programmed sewing. If
F1 - F4
No function at present.
8
If the function is activated, the pedal forwards function is used to select the program
speed as a fi xed speed. The pedal setting for stopping the fi xed speed is chosen with
parameter 206.
is reached.
ted during programmed sewing, the relevant seam sector is sewn in reverse
If the function is activated, switching to the next seam sector is not carried out by stitch
counting or sensor, but manually with the pedal setting "-2".
If the function is activated, the machine stops at the end of the seam sector.
rameter 111 corresponds to the light barrier compensation stitches. In the programmed
sewing mode, the number of stitches in the seam sector is used as the number of com-
pensation stitches.
the next seam sector after the number of stitches entered have been sewn.
off.
the LED is illuminated, programmed sewing is active.