PRESONUS FaderPort Owner's Manual page 21

5 Cubase / Nuendo (MCU)
5.1 Getting Started
3. Select "Mackie Control" from the pull-down menu.
4. Set the MIDI Input and Output to "PreSonus FP2. "
5. Click "Apply. "
6. Select MIDI Port Setup and make sure that "In All
MIDI" box is unchecked and then click "OK. "
7. You will need to switch the Mackie Control device to Compatibility
mode. To do this, select the Mackie Control from the Devices menu.
8. From the pop-up window, select Compatibility from the menu.
Your FaderPort is now ready to use. Enjoy!
FaderPort™ Multichannel Production Controllers
Owner's Manual
19