Supported Intel Server Boards - Intel SR2300 Technical Product Specification

9. Supported Intel
The SR2300 2U server chassis is designed to support the feature requirements of the Intel®
server boards SE7500WV2 and SE7501WV2. Please refer to the SE7500WV2 Technical
Product Specification and the SE7501WV2 Technical Product Specification for additional
baseboard information. It will support the following feature set:
• Dual Intel® Xeon processors socket 604
• Intel® E7500 chipset or Intel E7501 chipset.
• Support for six DDR 200 or DDR266 Registered ECC memory with two-way interleaving
up to 12GB's.
• Three separate PCI buses:
- Segment A: 32-bit, 33 MHz, 5 V (P32-A) with four embedded devices:
2D/3D graphics controller: ATI RAGE* XL video controller with 8 MB of SDRAM
ATA-100 controller: Promise Technology* PDC20277 (ATA-100 SE7500WV2
and SE7501WV2 server boards only)
- Segment B: 64-bit, 100MHz, 3.3 V, (P64-B) supporting the following configuration:
Three PCI I/O riser slots capable of supporting full height / full length PCI add-in
cards
Two network interface controllers: Intel® 82546PM Fast Ethernet Controllers
Segment C: 64-bit, 100MHz, 3.3 V (P64-C) supporting the following device:
-
Three PCI I/O riser slots, with support for low-profile PCI add-in cards only
Dual-channel wide Ultra-160 or Ultra- 320 SCSI controller providing one internal
and one high density external channel support: Adaptec* AIC-7899W or Adaptec
AIC-7902 SCSI Controller (SCSI SE7500WV2 and SE7501WV2 server boards
only)
• LPC (Low Pin Count) bus segment with two embedded devices:
- Platform Management Controller (PMC) providing monitoring, alerting, and logging of
critical system information obtained from embedded sensors on server board
Super I/O controller chip providing all PC-compatible I/O (floppy, serial, keyboard,
-
mouse)
• X-Bus segment with one embedded device:
- Flash ROM device for system BIOS: Intel® 32-megabit 28F320C3 Flash ROM
• Two external Universal Serial Bus (USB) ports on the rear of the board with an additional
internal header that provides one optional USB port for front panel support
• One external low-profile RJ45 Serial B port on the back of the board. An internal header
is available providing an optional Serial A port.
• Support for up to 4 multi-speed fans and 2 fixed speed fans.
• High density connectors for 2U chassis design support: front panel, floppy, ATA.
• SSI compliant connectors for SSI interface support: front panel, floppy, ATA.
Revision 1.2
SR2300 2U Server Chassis Technical Product Specification
®
Server Boards
Intel Order Number A94546-004
55