Cisco NCS 4016 Installation Manual page 83

Chapter 5 Installing Route Processor Cards, Fabric Cards, and Line Cards
Figure 5-9
1 Status LED
2 Attention LED
1. Port LEDs are triangular in shape and point toward the port that they support.
Table 5-4
LED
Status
20-Port 10GE OTN LC Front Panel and LEDs
20-Port 10GE OTN LC Descriptions
State Description
Green The LC is properly seated and operating correctly.
Yellow The LC has one or more errors detected.
Off No power is applied to the LC.
Cisco Network Convergence System 4000 Series Hardware Installation Guide
3 Port LEDs (one LED on each port)
About Line Cards
1
5-21