VWR International VWR 10 Instruction Manual page 48

5. Click Finish.
6. Disconnect pipette.
You can refresh the pipette's Maximal volume limit to pipette's specified maximal volume by clicking
the Reset to pipette max.
Note: the pipette must be registered in the software prior to transferring custom protocols. If the
connected pipette is not yet registered, a pop-up appears which informs you that the pipette is not
yet registered. Here, you can click on Add pipette now, which takes you to the pipette management
screen, or you can proceed to/stay at step 1 by clicking Connect different pipette.
• On the bottom left of Update pipette settings wizard, you can find the Pipette connection
information – An icon accompanied with text which reports the current connectivity
status.
The icon is green if there is a pipette connected to the computer if there is a pipette
connected to the computer or gray when there are no pipettes connected. The connectivity status is
refreshed when any of the buttons is clicked.
Updating pipette firmware
To update firmware VWR Electronic pipette follow these steps:
1. Click Update pipette settings in the main menu.
2. If a pipette is already correctly connected, proceed to step 4.
3. Connect pipette to the PC via USB cable and click Next. Should the pipette not be recognized
immediately, disconnect the USB cable, reconnect it and click Try again button.
4. Click the Update firmware button.
5. Navigate to the firmware file and click Open.
6. On the next dialog, click OK to confirm the firmware update. IMPORTANT: the pipette must not
be disconnected during firmware update. Disconnecting pipette could result in pipette
malfunction.
7. Wait for the firmware update, click OK and disconnect pipette.
8
Other administration
Here you can perform the following administrative tasks:
• Pipette management - Manage the inventory of your VWR Electronic pipettes.
• View history - View the history of protocol uploads to VWR Electronic pipettes and the
history of protocol modifications by user.
• Change password - Change the password to access VWR Protocol Builder Software.
• Institution/Company profile - Manage the information related to your Institution/Company.
48