VWR International VWR 10 Instruction Manual page 40

Default tasks available:
• Aspirate: aspirates specified volume into the tip.
• Dispense: dispenses specified volume from the tip.
• Dispense all: dispenses all remaining volume from the tip followed by a purge action.
• Repeat
: enables repetition of any task once or more.
(1)
• Mix: mixes the specific volume in one or more cycles.
• Purge: dispenses all remaining volume from the tip followed by purging extra volume.
• Wait: introduces a wait for a specified number of seconds.
• Beep: makes pipette produce a beeping sound while selected tasks are executed.
Add tasks to the protocol through drag-and-drop actions, by selecting a task and clicking the arrow
button or by double-clicking the task. Drag-and-drop actions position the tasks in the
following way: the selected task will be placed directly above the task highlighted in the protocol
section. If you are moving a task upwards or creating a new task, the task will be positioned above
the highlighted task. If you are moving the task downwards, the task will be dropped after the
highlighted task.
After you add a task to the protocol, you can modify task parameters.
40