VWR International VWR 10 Instruction Manual page 46

5/ You can also check "Mute beeps" if you want to disable any pipette sounds during beep tasks.
6/ Disconnect the pipette. The Custom protocol is now available on the pipette.
Note: Protocols that have a red error sign cannot be transferred to pipettes.
• You can transfer a protocol created for a different VWR Electronic Pipette model to the connected
pipette, providing the protocol is using volumes within the connected pipette's volume
specifications. Protocols that contain volumes outside connected pipette's volume will have a red
error sign .
• The pipette must be registered in the software prior to transferring custom protocols. If the
connected pipette is not yet registered, a pop-up appears which informs you that the pipette is not
yet registered. Here, you can click on Add pipette now, which takes you to the pipette management
screen, or you can proceed to/stay at step 1 by clicking Connect different pipette.
• On the bottom left of Transfer custom protocols to pipette wizard, you can find the Pipette
connection information - An icon accompanied with text which reports the current connectivity
status.
The icon is green if there is a pipette connected to the computer if there is a pipette
connected to the computer or gray when there are no pipettes connected. The connectivity status is
refreshed when any of the buttons is clicked.
46