VWR International VWR 10 Instruction Manual page 18

Battery charging
VWR Electronic Pipette charges 80 % of its full battery capacity in less than an hour, it takes three
hours to fully charge the battery.
1/ Charge your pipette by using the power supply:
- Connect the AC adapter to a suitable AC power supply (EU plug / UK plug....)
- Plug the adapter into the Mini USB port of the pipette.
- The pipette starts charging.
2/ Charge your pipette by using VWR Charging stand adapter:
- First place the stand adapter on your VWR Carrousel Pipette Stand
- Remove the plug. Now place your pipette on the Stand Adapter and plug the power transformer
into the stand adapter.
- The pipette starts charging.
Working with charger connected to the pipette
VWR Electronic Pipette can also be used for pipetting while charging.
- Plug the power supply into your pipette.
- Press the push-button to start your pipette.
- It's ready to pipette.
18