VWR International VWR 10 Instruction Manual page 13

CUSTOM Mode
The CUSTOM Mode enables personalized pipetting protocol creation on a computer for transfer
to VWR Electronic Pipette through VWR Protocol Builder software, an easy-to-use software.
To use this mode, the software has to be installed on the computer (file downloadable on
www.vwr.com/e-pipette).
To install VWR Protocol builder software:
1/ Download the appropriate VWR Protocol builder software installation file for your
operating system to the computer (Windows 32bits/ Windows 64 bits)
2/ Double-click the installer and follow the instructions on the screen to complete the installation.
3/ When completed, the VWR Protocol builder software icon will appear on desktop of the computer
if "Create desktop shortcut" is checked.
4/ If VWR Protocol builder software is not launched automatically double-click the VWR Protocol
builder icon on the desktop.
5/ Once installed, the VWR Protocol builder software can be run by any user on the installed
computer.
You can then create, edit, import or export custom protocols easily and rapidly.
To create a protocol, choose among the available tasks VWR Protocol builder software:
• Aspirate: aspirates specified volume into the tip
• Dispense: dispenses specified volume from the tip
• Dispense all: dispenses all remaining volume from the tip followed by a purge action
• Repeat: enables repetition of any other tasks once or more
• Mix: mixes the specific volume in one or more cycles
• Purge: dispenses all remaining volume from the tip followed by purging extra volume
• Wait: introduces a wait for a specified number of seconds
13