Appendix E - Command Error List Values - ProSoft Technology MVI69-DFCM User Manual

Appendix E – Command Error List Values
COMMAND ERROR LIST VALUES
LOCAL STS ERROR CODES
0x0000 Success, no error
0x0100 DST node is out of buffer space
0x0200 Cannot guarantee delivery (Link Layer)
0x0300 Duplicate token holder detected
0x0400 Local port is disconnected
0x0500 Application layer timed out waiting for response
0x0600 Duplicate node detected
0x0700 Station is offline
0x0800 Hardware fault
REMOTE STS ERROR CODES
0x0000 Success, no error
0x1000 Illegal command or format
0x2000 Host has a problem and will not communicate
0x3000 Remote node host is missing, disconnected or shut down
0x4000 Host could not complete function due to hardware fault
0x5000 Addressing problem or memory protect rungs
0x6000 Function not allowed due to command protection selection
0x7000 Processor is in Program mode
0x8000 Compatibility mode file missing or communication zone problem
0x9000 Remote node cannot buffer command
0xA000 Wait ACK (1775-KA buffer full)
0xB000 Remote node problem due to download
0xC000 Wait ACK (1775-KA buffer full)
0xD000 Not used
0xE000 Not used
0xF0nn Error code in the EXT STS byte (nn contains EXT error code)
ERRORS WHEN ETX STS IS PRESENT
0xF000 Not used
0xF001 A field has an illegal value
0xF002 Less levels specified in address than minimum for any address
0xF003 More levels specified in address than system supports
0xF004 Symbol not found
0xF005 Symbol is of improper format
0xF006 Address does not point to something usable
0xF007 File is wrong size
0xF008 Cannot complete request
0xF009 Data or file is too large
0xF00A Transaction size plus word address is too large
ProSoft Technology, Inc.
MVI69-DFCM User Manual
June 24, 2004
Appendix E – Command List Error Values
85