Scsi Connector J6; Scsi Connector J6 Interconnect Signals - Motorola MVME712-10 User Manual

Support Information

SCSI Connector J6

Connector J6 is a high-density 16-bit-wide SCSI P cable connector that is
connected internally to the low-density 8-bit wide SCSI connectors J5 and J7.
3
Each pin connection, signal mnemonic, and signal characteristic for the
connector is listed in Table 3-3. Refer also to the schematic diagram for SCSI
interconnect lines.
Pin Number
1-10
11
12-31
32
33-36
37, 38
39, 40
41
42-58
59
60
61-68
3-4
Table 3-3: SCSI Connector J6 Interconnect Signals
Signal
Mnemonic
Not connected.
GND GROUND - This ground isolated from rest of
board for SCSI only.
SCSI06- SCSI interconnect lines.
SCSI25
GND GROUND - This ground isolated from rest of
board for SCSI only.
TERMPWR TERMINATOR POWER
Not used.
SCSI26, SCSI interconnect lines.
SCSI27
GND GROUND - This ground isolated from rest of
board for SCSI only.
SCSI28- SCSI interconnect lines.
SCSI44
GND GROUND - This ground isolated from rest of
board for SCSI only.
SCSI45 SCSI interconnect lines.
Not connected.
MVME712-10 Transition Module and I/O Distribution Set UserÕs Manual
Signal Name and Description