Advertisement
Switchting Mode Selecting
There are three operating modes, which can be selected on the bottom of the stand
base, Push On / Push Off, Momentary On and Momentary Off. (Figure 3)
＊Push On / Push Off:
Switch to "PUSH ON/OFF" mode. Press the On / Off Switch to talk and press again to mute.
＊Momentary On:
Switch to "MOM. ON" mode. Microphone is ON only while the On / Off Switch is being pressed. (Push to Talk)
＊Momentary Off:
Switch to "MOM. OFF" mode. Microphone is OFF only while the On / Off Switch is being pressed. (Push to Mute)
LED Indicator
LED indicator shows the On/Off status . When the LED lights up, the microphone is ON to talk and the power
supply is normal.
Specification
Frequency Response: 20 to 20,000 Hz
Power Requirement: Phantom power 9V~52V or battery power 9V
Current Consumption-Stand by: 1 mA
Current Consumption-Operating: 2.07 mA (BAL), 1.34 mA (UNBAL)
Switches: ＊Push control: on / off
＊Microphone selection: ECM MIC unbalanced input, ECM MIC balanced input, Dynamic MIC input
＊Switchting Mode Selector: push on / push off, momentary on, momentary off
Connector: Unbalanced and balanced audio input (3P XLR, Female)
Unbalanced and balanced audio output (3P XLR, Male)
Net Weight: 0.82 kg
Dimension (m/m)
101.5
S T- 5050i
www.maxlight.ru
61.2
23.5
33.3
SWITCH MODE
ECM MIC unbalanced
audio input
PUSH ON/OFF
(Power Supply: Battery)
MOM. ON
MOM. OFF
DYNAMIC MIC
Figure 3
Advertisement
